Industrial High Temperature Electric Powder Coating Curing Oven for Sale

Product Description

 

Powder Coating Oven

Product Overview

1. The oven is assembling structure with manual double swing gate on single side, and the workpiece is conveyorized by hanging type workpiece trolley. Outer plate of the oven is made of anti-corrosion treatment coled rolled sheet , glossy ,clean and beautiful. Inner plate of oven is made of Stainless Steel or galvanizing sheet. The intermedium filling materials is heating insulation rock wool, by which to make sure the heat calories not flowing out from the oven and achieve the aim of saving energy. Exhausting air emission system and fresh air supplement system are designed separately on the oven roof and side, which prevent from the accumulation of inflammable and explosive gas, reducing the inside pollution of the oven caused by harmful gas, thus improve the products quality.

2. Oven is directly heated by diesel source.Hot air circulation system is by "Bottom blowing-in and top side air-returning" mode, uniform adjustable air outlets are set up for direct air-pressure bearing duct ,which makes the uniform temperature of inner oven.

3. Adopting automatic temperature adjustable system, temperature controlling system consists of temperature regulator, temperature-measured probe, heating source controlling device etc. temperature-measured heating resistor is inserted in the oven. Digital readout temperature controller will measure the temperature reading generated from the temperature-measured resistor and control the heating source device, (Start or stop heating), and control the temperature within preset range.
 

 

1. Electric powder coating ovens are generally faster to respond to the need to change baking temperature as electric elements are able to rapidly change their temperature allowing for faster changes in the ovens temperature. This fast response is one of the greatest benefits to an electric powder coating oven.

2. Our electric powder oven is smaller than our gas ovens and easier to install in that they don't require a gas supply.

3. They are suitable for small components and/or occasional curing requirements.

4. Our electric powder coating oven models make efficient use of shop space and are designed for batch powder curing without constant product throughput. Wall-mounted elements evenly heat the oven interior.
 

 

Temperature range	180-220ºC
Outline dimension	L3200*W2200*H2150
Inline dimension	L3000*W2000*H2000
Wallboard material	10cm rock wool, fireproofing board
Frame	10cm*10cm galvanised square pipe
Cargo door	Hinged door, with door lock
Heating system	Iron heating tube with heat sink, which has long life and no deformation. 24 pieces layed at the bottom of the booth
Booth floor	Steel grating, 1.2m*3m, 1 piece. Floor with frame and rock wool board
Floor track	2 pieces
Control box	Electric appliance of DELIXI, with function of overtemperature alarm, timer clock and leakage protection

Classification

Ovens are divided into air heated ovens and electric heated ovens.

Gas heated ovens.1. it has penetration and can be heated inside and outside at the same time to quickly achieve the purpose of drying.
2. no heat medium transfer is required, and the thermal efficiency is good.
3. it can also be locally heated to save energy.
4. the design breaks through the idea of traditional paint baking room, reduces the pipeline and heating mechanical system, makes the space combination, installation and maintenance simple and easy, greatly reduces the hidden trouble, avoids the disadvantages of huge energy consumption of ordinary electric paint baking room, and saves costs.
5. the heating process is environmentally friendly, free of pollution, electromagnetic radiation, clean, noise and secondary pollution.6. easy temperature control, rapid temperature rise and high safety.

Electric heated ovens.

1. Hot air circulates in the oven (generally can be heated directly with hot air), which has high thermal efficiency and saves energy;
2. Using natural gas as energy, the energy cost can be reduced by 40-50% compared with using power heating;
3. With forced ventilation, the oven is equipped with an air duct to dry the materials evenly;
4. The oven runs smoothly. Automatic temperature control, easy installation and maintenance;
5.It has a wide range of applications and can dry various materials. It is an ideal universal drying equipment

Related machines

We have a complete set of powder coating line.
Spray booth (recovered powder) - reciprocating machine - powder spraying machine - oven.
 

Plastic powder spraying recycling cabinet, also known as powder recycling room. It is mainly used in powder spraying line workshops of all walks of life as equipment for recycling powder.

The powder spraying cabinet features that the powder remaining in the powder spraying time is directly sucked to the filter element through the fan for filtration treatment. Then, the air pump blows air to send the powder stained on the filter element to the recycling box.

The powder spraying cabinet is a new type of product which is worthy of customers' trust and tolerance because of its simple operation and stable and safe use.

JRX reciprocator is electrically driven by a frenquency control motor via PLC,giving gentle and precise motion,thus ensuring pefect coating result.It is wheel for easy moving and fix.The slim colum design allows for space saving arrangement of the guns.

Feature of the reciprocator:
1. Could store 20 programs
2. Easy operation
3. Smooth and accurate
4. Solid and maintennace free
5. Height or the stroke adjustable and customized

 

After-sales service

[1] The warranty period of the product is one year. During the warranty period, if the product parts have quality problems, if the user is not responsible, the contractor is responsible for the repair.
[2] After the equipment is operated, the Contractor shall be responsible for tracking the service for two working days.
[3] Contact users by telephone regularly to solve equipment related issues.
[4] The Contractor shall provide technical guidance services for the equipment provided.

Company Profile

Qingdao JRX M&T Co., Ltd.
We are Qingdao JRX M&T Co., Ltd.

Which company is mainly engaged in paper coating machine, paper machine and related technology. After more than ten years of efforts, in addition to the machine itself, we have our own chemists, more willing to provide customers with
chemistry,formulation, technology and other advice. Then our formulations will match our machines and get the best quality paper
for them.

At present, the company has become one of the famous paper coater manufacturers in China, coater and technology has been exportedto Egypt, Mexico, Australia, India and other countries.

Packing

In order to save space and freight, we usually choose to split and send. After the oven is delivered to the customer, we teach the installation.

FAQ

1.Is there person reply to me?
Our person is 24-hours online. If no reply, please leave your message via e-mail and chat tools, we will reply you as soon as possible.
2.Why we choose your company, what could you do for me?
We have established for more than 10 years, we have the stable production experiences.
We use the best steel to guarantee the products' quality.
We will always give you the heart to heart service.
We always speak with facts and quality.
3.Could your engineers teach and train our worker and stay in our factory for long time?
Yes, we have very large installation team, they can train and teach your worker to operate the paper machine, but you should pay them salary.
4.How can i know your machine work well?
Before delivery, we will test the machine work condition for you.