| Classification: | Double-blade Cutter |
|---|---|
| Driven Type: | Electric |
| Type: | Industrial Cutter |
| Blade Material: | Stainless Steel |
| Computerized: | Computerized |
| Transport Package: | in Wooden Case with Water Resistant Kraft Paper |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier | Paper Width | Gross width 890mm, net width 840mm |
| Cutting numbers | 4 cutting-A4 210mm (width) |
| Paper roll's diameter | Max.Ф1200mm. Min.Ф600mm |
| Paper core's diameter | 3"(76.2mm)or 6"(152.4mm) or according to the clients' demand |
| Packing Paper grade | High-grade copy paper; High-grade office paper; High grade Free Wood paper etc. |
| Paper weight | 60-100g/m2 |
| Sheet length | 297mm ( specially design for A4 paper, the cutting length is 297mm) |
| Ream amount | 500 sheets Max. Height: 65mm |
| Production speed | Max 0-120m/min(depends on different paper quality) |
| Max. Numbers of cutting | 404/min |
| Output of the ream | 12reams/min |
| Load of cutting | 400g/m2 (4×100g/m2) |
| Cutting accuracy | ±0.2mm |
| Cutting condition | No variation of the speed, no break, cut all the paper at one time and need the eligible paper. |
| Main power supply | 3*380V /50HZ |
| Voltage | 220V AC /24V DC |
| Power | 32KW |
| Air consumption | 300NL/min |
| Air pressure | 6 bar |
| Edge cutting | 2×10mm |
| Safety standard | Design according the safety standard of China |
| Machine Type | Each machine table can take 2sets of shaftless paper rack. |
| Diameter of the paper roll | Max. Ф1200mm |
| Width of the paper roll | Max. Ф890mm |
| Paper rack's material | Steel |
| Clutch device | Pneumatic Braker and control |
| Clip arm's adjustment | Manual adjust by oil pressure |
| Paper core demanding | 3"(76.2mm)or 6"(152.4mm) or according to the client's need |
| When the paper through inductor, that automatic feedback to the PLC control system to increase brake load, increase or reduce the tension that control the paper tension automatically. |
| 1) Upper and lower knives are rotary make the cutting accuracy is very precision. |
| 2) Anti-curve device Include one set of square bar and steel wheel. When the curve paper through paper edge unit that can adjust the paper square and let it flat. |
| 3) 5 sets slitting knives Upper slitting knife take by air pressure and spring. Lower knife connect with bear drive(the diameter is Ф180mm ) and move with spring. The upper and lower round knife is made by SKH.The lower slitting knife (diameter is Ф180mm) and drive with in-phase belts. The lower slitting knife is 5 groups, each group have two knife edge. |
| Upper wheel | : | Ф200*900mm (rubber covered) |
| Lower wheel | : | Ф400*1000mm (anti-glide) |
| 5) Cutting knife group | ||
| Upper cutting knife | : | 2 sets 1100mm |
| Lower cutting knife | : | 2 sets 1100mm |
| 6) Driving group(High precision bear and belt drive) | ||
| 7) Main driving motor group: 22KW | ||
| 1) Transporting by level and overlapping device |
| 2) High speed transporting belt and press wheel. Upper and lower transport belt corresponding pressure paper, automatic tension and close system. |
| 3) Static removal device(Include static removal bar and Negative ion generator) |
| Upper knife | : | 2 sets 1100mm Material: compounding of tungsten steel |
| Lower knife | : | 2 sets 1100mm Material: compounding of tungsten steel |
| Upper slitting knife | : | 5 sets Ф180mm Material: SKH |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}